G10 SAK Scales Fullers - Gray
Our G10-SAK scales also have the factory toothpick slot and tweezer slot. Our matched billet titanium pocket clip uses the standard 3 screw pattern so the user can swap out the clip and personalize with other after market pocket clips such as the Dragontail pocket clips from our friends over at Steel Flame and others, if so desired.
Please note that these are intended as a permanent replacement for the factory scales. These are precisely machined to match the brass ferrules of a 91mm SAK and will easily press fit into place with a vice or clamps and a piece of leather to pad the jaws. These G10-SAK replacement scales will require a little dab of a high quality epoxy or JB Weld when fitting. *Warning, when using other after market 3 hole pattern pocket clips, make sure you use the correct length machine screws so they are not so long where they will press out the flush fit G10 scale.
Modification of your 91mm type SAK with these G10 scales are done so at your own risk. This is a home DIY modification. Install with caution, know what you are doing, know how to operate a vice or clamps safely. Prometheus Design Werx, INC is not to be held responsible for any damage to your SAK and the G10 scales during installation. Please click here for step by step installation instructions.
Customer ReviewsBased on 4 reviews100%(4)0%(0)0%(0)0%(0)0%(0)T
I modded all of my EDC SAKs and I use them all. I rotate them between off duty and on duty. The clip makes them easily accessible and instantly deployed. I haven't seen a more ingenious idea in forever.
I would buy more if they get restocked. May I suggest a dark blue with orange circle around the GID ?
Also , just nitpicking, but if the clip were to align with the lanyard at the top rather than the bottom....
Love PDW and all you guys stand for. Be safe!
- Jason 1242J
Swiss Army knives are so versatile but can sometimes be a bummer to carry. These scales solve that issue and also make it look great. I would highly recommend to anyone who has a Swiss Army knife and enjoys carrying it to get these scales.A
Wow and very happyJ
Love these SAK scales! Definitely adds a premium feel to my pocket knife. And the glow dot is insanely bright and seems to absorb even the slightest amount of light - very impressive.
I followed the instructions for installation and I did add some epoxy (JB Weld 5 min epoxy) before clamping down. Unfortunately, my SAK stainless steel liners are not perfectly flat, so even though I clamped and glued down the G10 scales, there is a very small gap on the very end of the pocketknife. Is it noticeable? Not really, only if you look for it. And it doesn't do anything to ruin the functionality of the tool. It's not a defect with the G10 scales or the SAK, it's just something to keep in mind when making this modification. Overall, I'm very satisfied with the product.
- Dive Watch Grade Strontium Aluminate (GID Material)
- 6AL-4V Titanium
- 316 Stainless Steel Machine Screws
- Height: 91mm
- Width: 18.03mm Tapers to 20.06mm
- Fully Shaped and Contoured G10
- Five Handle Fullers
- Glow Dot
- Titanium Billet Pocket Clip
- Standard 3 Hole Pattern Allows for Other After Market Pocket Clips
- Slot for Factory Tweezers
- Slot for Factory Toothpick
- SPD Kraken Trident Laser Mark